您可能感興趣的試卷
你可能感興趣的試題
A.Increase MTU of the interfaces to accommodate larger OSPF packets.
B.Change the network type to point-to-point on those links.
C.Reduce SPF initial timer.
D.Increase hello interval to avoid adjacency flapping.
E.Enable OSPF
A.examine all packets received to make sure that the source addresses and source interfaces appear in the routing table and match the interfaces where the packets were received
B.check to see if any packet received at a router interface arrives on the best return path
C.combine with a configured ACL
D.log its events,if you specify the logging options for the ACL entries used by the unicast rpf command
E.inspect IP packets encapsulated in tunnels, such as GRE
最新試題
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
What is the next state of initial in spanning-tree protocol?
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?()
QoS機制中的分類,采用ip數據包中的哪個字段?
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?()
four switches, which one will be root switch.(no pic).
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()
問一個怎么樣的屬性,能讓路由不通告給任何的peer?
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()