A.SW13 has a higher VTP configuration revision than the current VTP revision
B.SW13 is configured as a VTP server with a different domain name
C.SW13 is configured as a VTP server with the domain name R1
D.SW13 has a lower VTP configuration revision than the current VTP revision
E.SW13 is not configured to participate in VTP
F.SW13 is configured with only VLAN1
您可能感興趣的試卷
你可能感興趣的試題
On the basis of the following exhibit, can you tell me why VLAN updates from switch CK-P2S1 arenot applied to switch CK-P1S1?()
A.The MD5 digests do not match
B.Switch CK-P1S1 is in transparent mode
C.The passwords do not match
D.The VTP domains are different
A.In a 6to4 tunnel, the first two bytes of the IPv6 address will be 0x2002 and the next four byteswill be the hexadecimal equivalent of the IPv4 address
B.In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the2002:1315:4463:1::/64 IPv6 address
C.In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the 2002:c0a8:6301::/48IPv6 address
D.In a 6to4 tunnel, the first two bytes of the IPv6 address will be locally derived and the next twobytes will be the hexadecimal equivalent of the IPv4 address
E.In a 6to4 tunnel, the IPv4 address 192.168.99.1 would be converted to the 2002:c0a8:6301::/16IPv6 address
A.6to4 is a manual tunnel method
B.Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates6to4 tunneling
C.Each 6to4 site receives a /48 prefix in a 6to4 tunnel
D.2002::/48 is the address range specifically assigned to 6to4
E.Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4tunneling
A.Only OSPF version 3 can be utilized for routing IPv4 and IPv6
B.IPv4 and IPv6 networks can be routed simultaneously
C.IPv6 can be routed using the same routing protocol versions as IPv4
D.A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them
E.None of the other alternatives apply
A.192.168.30.1:0:0:0:0:0:0
B.0:0:0:0:0:0:192.168.30.1
C.::192.168.30.1
D.C0A8:1E01::
E.192.168.30.1::
F.::C0A8:1E01
最新試題
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define?()
Match the xDSL type on the above to the most appropriate implementation on the below.
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
Drag the DSL local loop topic on the left to the correct descriptions on the right.
Drag and drop question. The upper gives the MPLS functions, the bottom describes the planes.Drag the above items to the proper location at the below
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.(Not allstatements will be used)
Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()
Study the exhibit carefully. The Cisco IOS IPsec High Availability (IPsec HA) Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is, Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec?()
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec, which two parameters are required when defining the tunnel interfaceinformation?()