A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
您可能感興趣的試卷
你可能感興趣的試題
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
A.warm-up allows the hydraulic system to become charged with oil
B.warm-up allows the relief valves to be properly tested
C.hydraulic strainers operate only during the warm-up period
D.hydraulic fluid must be at the proper viscosity
A.are exposed to a vacuum
B.come in contact with extremely hot surfaces
C.are reduced in temperature to just above the pour point
D.become extremely agitated or aerated
A.weight
B.internal friction
C.demulsibility
最新試題
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
The major source of chemical contaminants in hydraulic fluid is （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
A pressure drop through the refrigerant liquid line may cause （）.