A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
您可能感興趣的試卷
你可能感興趣的試題
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
A.Increased viscosity of the product needs higher loading pressure, which increases the chances of a spill
B.Air pockets may cause the fuel to bubble out of the ullage hole
C.The temperature rise of the fuel will cause an overflow
D.Fueling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened
最新試題
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The cetane rating of diesel fuel is an indication of the （）
（） is not installed on the main switchboar.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If separating effect is not good, which measure should be taken （）
The condensers located in various stages of a flash evaporator are cooled by（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.