A.locate the fire
B.determine which type of fire is burning
C.sound the alarm
D.fight the fire
您可能感興趣的試卷
你可能感興趣的試題
A.flame relief valve
B.flame stopper
C.safety valve
D.flame arrester
A.condensation in the fuel tank
B.a crack in the hull portion of the fuel tank
C.a load of bad fuel
D.contamination from the saltwater flushing system
A.sounding the tank
B.waiting for the vessel to list
C.examining tank boundaries
D.checking fuel oil strainers
A.on the outgoing tide
B.overboard after dark
C.overboard through an oily water separator
D.anytime in an emergency, i-emain engine lube oil failure
A.drained into the vessels bilges
B.reclaimed for other uses
C.held in a slop tank
D.purified and then reused
最新試題
Which of the following items don’t belong to dock repair works?（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）