A.drained into the vessels bilges
B.reclaimed for other uses
C.held in a slop tank
D.purified and then reused
您可能感興趣的試卷
你可能感興趣的試題
A.when the remaining charge volume is less than 90 percent of the required VOLUME
B.at each inspection for certification
C.at each annual inspection
D.when the weight loss exceeds 10% of weight of charge
A.welding brackets across both ends of the crack
B.chipping out and slot welding the entire crack
C.drilling a hole at each end of the crack
D.cutting a square notch at each end of the crack
A.breaking the fire chemical chain reaction
B.smothering
C.cooling
D.isolating the heat from the fuel
A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The condensers located in various stages of a flash evaporator are cooled by()
The main purpose of port State control is not to()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Using a file without a handle may result in ()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
If separating effect is not good, which measure should be taken ()
() is not installed on the main switchboar.
The ISPS Code consists of a mandatory section-Part A, which shows()