A.Leaking seal ring
B.Insufficient heat transfer from the exhaust valves
C.Block cooling water passages to the head
D.Excessive scavenging air provided to the engine
您可能感興趣的試卷
你可能感興趣的試題
A.ignition quality of the fuel
B.calorific value of the fuel
C.flash point of the fuel
D.rate of fuel consumption
A.Viscosity
B.acid content
C.heating value
D.ignition quality
A.Viscosity
B.Sulfur content
C.Pour point
D.Cetane number
A.Exhaust energy would draw excess air
B.The inertia of the turbocharger rotor causes a time lag which delays the turbocharger speed increase
C.Exhaust gas pumping losses are increased due to turbine windage
D.Exhaust gas back pressure falls slightly due to increased nozzle action
A.use of low viscosity oil in cold weather
B.increased moisture content of inlet air in cold weather
C.increased drag of pistons and bearings due to increased oil viscosity
D.higher compression pressures reached due to smaller clearances existing in the engine during cold weather
最新試題
Using a file without a handle may result in （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Diesel engine air start system check valves are opened by （）
The main purpose of port State control is not to（）
Which of the following items don’t belong to dock repair works?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）