A.water in the fuel
B.cold lube oil
C.excessive starting air pressure
D.excessive fuel pressure
您可能感興趣的試卷
你可能感興趣的試題
A.fuel pump should be removed and all connections blanked off
B.cylinder oil feed rate should be increased slightly above that used at normal sea speed
C.cylinder oil feed rate should be reduced
D.cylinder oil feed rate should be increased to the maximum flow capable of the metering pump
A.the proper back pressure
B.the cooling water temperature
C.correct timing and proper seating
D.accurate metering and the exhaust temperature
A.low exhaust back pressure
B.air in the fuel system
C.gasket blow-by or leakage
D.incorrect assembly of idler springs
A.Hydraulic starting
B.Electric starting
C.Ignition
D.Fuel
A.pumping action of the piston
B.pressure of the fuel charge
C.vacuum developed in the manifold
D.pressure of the fresh air charge
最新試題
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The condensers located in various stages of a flash evaporator are cooled by()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The cetane rating of diesel fuel is an indication of the ()
The shipboard oil pollution emergency plan will be invalid after ()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Under MARPOL Code the ship to which it applies has to carry ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()