A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
您可能感興趣的試卷
你可能感興趣的試題
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
最新試題
Which of the following items don’t belong to dock repair works?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Cold weather starting of a diesel engine may be made easier by（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Under MARPOL Code the ship to which it applies has to carry （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）