A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
您可能感興趣的試卷
你可能感興趣的試題
A.The cylindrical barrel is coupled to the motor
B.The cylindrical barrel has an odd number of bores
C.The bores end in sockets
D.The sockets fit in the swash plate
A.The rams work inside cylinders
B.The cylinders have glands sealing their open ends
C.The rams are connected to a cross-head
D.The cross-head is mounted on the rudder stock
A.keep the air from being carried into the engine
B.keep the moisture from being condensed
C.keep the danger from being carded into the engine
D.take away the condensate from the air
Which of the following operations need to be entered on the Oil Record Book Part I? （）
(1) Ballast of fuel oil tanks
(2) Condition of oil discharge monitoring and control system
A.（1）only
B.（2）only
C.both（1）and（2）
D.neither（1）nor（2）
Which of the following operations need to be entered on the Oil Record Book Part I?（）
(1) Cleaning of fuel oil tanks
(2) Internal transfer of fuel oil
A.（1）only
B.（2）only
C.both（1）and（2）
D.neither（1）nor（2）
最新試題
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
The general purpose of a heat exchanger is to （）.