A.cause a loss of the liquid seal
B.create a vapor lock in the liquid receiver
C.collect in the condenser
D.cause foaming of the oil in the crankcase
您可能感興趣的試卷
你可能感興趣的試題
A.only by the pump as its primary function
B.by resistance to the fluid flow through the system
C.by the thermal input to the systems fluid
D.solely by the charge applied by the accumulators
A.increase the flow of the cooling water through the condenser
B.adjust the high pressure cutout to maintain the desired pressure
C.open the hot gas bypass temporarily to reduce capacity
D.purge non-condensable gases to reduce the excess pressure
A.Special tools are required for lapping or grinding
B.It is impossible to throttle flow with a butterfly valve
C.To close the valve, it is only necessary to turn the handle a quarter of a turn
D.The butterfly valve should never be used in a freshwater system
A.closely observe the pump discharge temperature
B.close off the discharge valve, and watch for a rise in pressure
C.momentarily close off the suction valve, and watch for a rise in pressure
D.use a clamp on ammeter and compare the readings to past records
A.removing all but the frictional load during starting
B.relieving intercoolers of high temperature buildups
C.providing high starting torque in the drive motor
D.seating valve plates during compressor shutdown
最新試題
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
Low compressor head pressure in a refrigeration system can be caused by().
The major source of chemical contaminants in hydraulic fluid is ().
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
The general purpose of a heat exchanger is to ().
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().
A salinity indicator is used to determine the ().
One cause of high head pressure occurring in a refrigeration system can be ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().