A.breaking the fire chemical chain reaction
B.smothering
C.cooling
D.isolating the heat from the fuel
您可能感興趣的試卷
你可能感興趣的試題
A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
最新試題
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
To proceed to the assistance of a ship in distress is()
The condensers located in various stages of a flash evaporator are cooled by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Which of the following items don’t belong to dock repair works?()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Diesel engine air start system check valves are opened by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()